DREW PLUS 2101EFG FDA Food grade bentex antifoam 
Bag of SEINER dye
Sewage sanitary disinfectant
AMEROID pipe repair system
AquaMend-Underwater Repair System
Oil spill dispersant of EPA approval
MTU G93 appointed water treatment agent
All Cooling Water System Antifreeze
Anti-icing Aviation Fuel Additive


AMEROID Pipe Repair System
Ideal for repairing pipe leaks, reinforcing pipe joints, rebuilding thinning pipe walls and corrosion proofing – in virtually any situation, even underwater! It fully cures to a hard, durable repair in 30 minutes.
The Pipe Repair System includes a strong knitted fiberglass tape coated with fast setting urethane resins that are water-activated. The system also includes FIX STIX
, a steel-filled hand-moldable epoxy that sets rock hard in only 20 minutes.
It is perfect for plugging leaks, filling creaks and complex voids and offsets at couplings and fittings.

Work on :

Any metal or plastic pipe :
Steel, Copper, Aluminum, Galvanized Black lron, Stainless Steel, PVC CPVC, Fiberglass, Polyethylene Polypropylene and even PVDF.
Used for :

Routine and Emergency Leak Repair Hazardous Material Spill Control Structural Reinforcement.
Sealing Joints Rebuilding Thinning Wall Corrosion Proofing.
Abrasion Protection Repairs in Hard to Reach Areas Underwater Repairs Electrical Conduit Repair.
Is used by :

Petrochemical, Industrial Processing, Pulp and Paper, HazMat Response, Military, Marine , Irrigation, Power Generation,   Facilities Maintenance, Water/Wastewater, Manufacturing, Commercial Fishing, Food Processing, Pharmaceutical, Automotive.

AquaMend-Underwater Repair System
AquaMend is a patented, hand-mixable, specialty epoxy putty for repairs to damp, wet areas and underwater surfaces. When mixed together, the materials combine to form a polymer compound that may be applied underwater (either fresh or salt water), and will bond tenaciously to substrates such as fiber glass, metal, wood, concrete, ceramic, glass and many plastics. After final cure, AquaMend can be drilled, sawed, carved, sanded or painted, It is a non-yellowing epoxy putty that cures to fiberglass white.

Before applying, roughen and clean the area to be repaired. Wash hands to prevent discoloring product. Then follow 
these easy step:
1. Cut
or twist off required amount.
2. Mix by kneading with fingers to a uniform color. If mixing is difficult, warm AquaMend to room temperature or slightly 
3. Apply to surface to be repaired (within 10 minutes of mixing). Force into any cracks or holes and strike off excess 
    material, preferably with a tool wet with water.