B phosphate boiler water treatment is a pure neutral grade
of disodium phosphate. It is used in conjunction with GC concentrated
alkaline liquid to prevent calcium scale deposits in high
and low pressure boilers. Calcium hardness is converted to
soft, non-adherent sludge that can be easily removed by blowdown.
water treatment.Water softening.Precipitation of calcium hardness
from boiler water to prevent scale deposits.
concentrated alkaline liquid is a concentrated alkaline liquid
used in conjunction with ADJUNCTR B phosphate boiler water
treatment to prevent the formation of calcium and magnesium
scale deposits in high and low pressure boilers.
Hardness constituents are converted to soft, non-adherent
sludge that is easily removed by blowdown.
water treatment.:Boiler water alkalinity control. Raises pH
of boiler water.
corrosion inhibitor is a solution of catalyzed hydrazine.
It is used to control ferrous and non-ferrous corrosion in
boilers and steam, condensate and feedwater lines.
corrosion inhibitor reacts with dissolved oxygen, producing
no dissolved solids in the boiler water. It forms a protective
oxide film on both iron and copper surfaces.
applications:Boiler water treatment.
COAGULANT boiler sludge conditioner is a colorless, high molecular
weight solution used in both medium and low pressure boilers
to prevent sludge deposits. It is especially useful when feedwater
becomes contaminated by oil. Dosing LIQUID COAGULANT conditioner
to the boiler coagulates the oil droplets, causing these suspended
solids to settle to the low points of the boiler where they
are removed by blowdown.
Industrial applications:Boiler water sludge conditioner;coagualant
for oily matter and suspended solids.
condensate corrosion inhibitor is a liquid alkaline amine.
It is used to control corrosion in condensate return lines
and on steam condensing surfaces by traveling and condensing
with the steam. SLCC-A inhibitor neutralizes the corrosive
effects of carbonic acid formed by carbon dioxide and maintains
non-corrosive pH conditions from the point of condensation
onward throughout the system.
water treatment. Corrosion control agent for treatment of
and feedwater treatment
100 boiler and feedwater treatment provides an effective and
easily applied program for protection of all motor vessel
auxiliary and exhaust gas economizer boilers. Water or smoke
tube, natural or forced circulation boiler systems are suitable
for the application of AGK 100 treatment.
uniform high quality water AGK 100 treatment will condition
feed water hardness to form a loose, non-adherent sludge,
thereby preventing scale formation on boiler surfaces. The
corrosion inhibitors in AGK 100 treatment will maintain the
internal boiler surfaces in a clean, uncorroded condition
while also providing corrosion protection to the steam and
condensate system. This latter property serves to reduce the
deposition of metal oxides (corrosion products) on boiler
surfaces. Such deposits are a major cause of tube failures
in both exhaust gas and auxiliary boilers.
The major advantage of AGK 100 treatment is that it provides
complete protection, requiring a minimum of operator attention
to exhaust gas economizers and auxiliary boiler systems.
Industrial applications:Boiler water treatment. pH-control
and oxygen-scavenger.Corrosion control agent for treatment
of steam lines.
AT boiler water treatment is a phosphate-based treatment combined
with synthetic polymers providing the ultimate in simplicity,
system flexibility and treatment control for all motor vessel
auxiliary and exhaust gas economizer boilers. DREWPLEX AT
boiler water treatment provides a cleaner boiler by allowing
greater tolerance of feedwater quality fluctuations.
The polymers in DREWPLEX AT boiler water treatment serve as
deposit control agents by adsorbing onto the surface of boiler
water precipitates, keeping the particles soft, nonadherent
and easily transported through blowdown. Iron dispersancy
is also achieved with DREWPLEX AT boiler water treatment by
sequestering deposits caused by iron.
In addition to combining alkalinity control, scale inhibitors
and deposit control, DREWPLEX AT boiler water treatment provides
protection from corrosion in the afterboiler section caused
by low pH. When coupled with DREWPLEX OX corrosion inhibitor,
DREWPLEX AT boiler water treatment provides the most modern,
safe and effective approach to a motor vessel boiler water
OX corrosion inhibitor is a safe-to-use, unique, and fast-acting
catalyzed oxygen scavenger for use in low, medium and high
pressure steam generating systems. Because DREWPLEX OX corrosion
inhibitor is volatile, excess in the feedwater will be carried
through the boiler with the steam and into the condensate
system, thereby protecting the entire boiler system from oxygen
corrosion. The catalyst in DREWPLEX OX corrosion inhibitor
accelerates the rate of oxygen removal in the feedwater, thereby
improving corrosion protection in the preboiler section.
In addition, DREWPLEX OX corrosion inhibitor is a powerful
reducing agent which establishes and maintains a passive oxide
layer on metal surfaces creating an effective barrier to corrosion.
The catalyst in the product also contributes to metal passivation.
When coupled with DREWPLEX AT boiler water treatment, DREWPLEX
OX corrosion inhibitor provides the most modern, safest and
effective approach to a motor vessel boiler water treatment
inhibitor for steamgenerating systems,oxygen scavenger and